How to create a Scene schedule using the Lumos Controls mobile app?

1. Go to the 'More' tab
2. Choose 'Scene Schedule'
   
3. Click on the '+' button, enter the desired schedule name and click 'OK' button
   
4. Select the 'Repeat' option if this schedule is to be repeated on multiple days 
   1. Enter the Start time and  End time for the scheduled operation 
   2. Select the days on which the schedule must be activated
      
5. Choose the 'Date' option if the schedule is to be activated on a particular date and time 
   1. Enter the 'Start date/time' and 'End date/time' for the scheduled operation
      
6. Choose the scene to be activated when the schedule starts 
7. Choose the scene to be activated when the schedule ends
8. Enable the 'Manual override' option to configure the duration after which the light devices should come back as per the schedule if there were a manual operation on the devices while the scheduled operation was in progress
   1. The default duration for the override is 120 min, and you can customize it between 0-120 min
      Note: During this period, the lights will not respond to the scheduled operation
   
   
   You can also visit the following sections for more information:
   To configure Daylight Harvesting, click here
   To configure Motion Based Automation, click here
   To configure Scenes & Animations, click here
   To understand Energy Monitoring reports, click here
   To understand Device Usage and Occupancy reports, click here
   To know the Operations and Control details, click here