How to configure AC-powered motion sensors connected to the input channels of Radiar AR10 or Ldrive 32W driver for automated lighting using the Lumos Controls mobile app?

1. Go to the 'Devices' tab
2. Click on the icon of the device
   
3. Select 'Additional Settings' and choose 'Input Sensor Settings' 
   
4. Choose the channel (Channel 1 or Channel 2) to which the motion sensor is connected and select 'Motion Sensor' from the drop down menu
   
5. Choose a voltage value beyond which the device should consider the input signal as a  motion sensor trigger
   1. The default value will be 1V and can be customized between 1V-10V
6. Go back to the 'Device Settings' page
7. Select the 'Motion sensor settings' option
8. 1. The default value of this interval will be 5 sec and can be customized between 5-245 sec Configure 'Motion sensor Triggering interval', which is the interval at which the sensor must send trigger if it is detecting motion continuously 
      
      

You can also visit the following sections for more information:
To configure Daylight Harvesting, click here
To configure Scenes & Animations, click here
To configure Light Schedules, click here
To know how to Commission & Configure Sensors, click here
To know how to Commission & Configure Control Devices, click here
To know the Operations and Control details, click here