How to automate Scenes with a daylight sensor?

1. Create a scene by adding the desired groups or light devices 
2. Configure the scene with the required operation. Learn more
3. Go to the 'Devices' tab
4. Click on the icon of the daylight sensor that should send trigger
5. Select the 'Daylight sensor settings' option
6. From 'Daylight Harvesting', click on the 'Custom' tab
7. Click on the 'Configure' button corresponding to the option 'When ambient light is greater than' or 'When ambient light is less than' or When ambient light is between' as per the requirement
8. Configure the light level above/below/between which if the daylight sensor detects light, the light devices shall be activated with a scene 
9. The light level can be configured using any of the three methods
   1. Maintain ambient light level
   2. Identify desired light level
   3. Enter sensor value
10. Then choose the Scene to be activated and click on the 'Save' button
    
    

You can also visit the following sections for more information:
To configure Daylight Harvesting, click here
To configure Motion Based Automation, click here
To configure Light Schedules, click here
To understand Energy Monitoring reports, click here
To know how to Commission & Configure Control Devices, click here
To know the Operations and Control details, click here