- Help Center
- 06. Web App Reports
- Occupancy Reports
-
01. Getting Started with Lumos Controls
-
02. Commission & Configure the Devices
- Settings before Device Commissioning (Pre-Commissioning)
- Control Devices- Commission
- Control Devices- Configure Output Channel Settings
- Control Devices- Configure Light Configuration Settings
- Control Devices- Configure Device Power Settings
- Control Devices- Configure Device Configuration Settings
- Control Devices- Configure Input Sensor Settings
- Sensors- Commission & Configure
- Switches- Commission & Configure
- Gateway- Commission & Configure
- Repeater- Commission & Configure
- Beacon Settings
- FAQ
-
03. Mobile App Features
-
04. Automate Lighting Experience
- Scene Schedule
- Motion Based Automation- Using Wireless Sensor
- Motion Based Automation- Using Wired Sensor
- Daylight Harvesting
- Daylight Harvesting using Open Loop mode
- Daylight Harvesting using Closed Loop mode
- Daylight Harvesting using Custom mode
- Automated Demand Response
- Human Centric Lighting
- FAQ
-
05. Web App Features
-
06. Web App Reports
-
Emergency Lighting
-
BMS Integration
-
Troubleshooting Guide
-
FAQ
-
Technical Data Sheets & Installation Guides
- Controller- Radiar D10
- Controller- ARD32
- Controller- ARD4
- Controller- AFD1/4
- Controller- AF10
- Controller- AR10
- Controller- Omni TED
- Driver- Ldrive 32W
- Driver- Ldrive 36W
- Driver- Ldrive 42W
- Driver- Ldrive 60W
- Sensor- Cyrus C
- Sensor- Cyrus F
- Sensor- Cyrus AP
- Sensor- Cyrus AM
- Switch- Catron IV
- Switch- Catron V
- Switch- Catron AI
- Gateway- Enor U
- Gateway- Enor E
- Repeater- Senor E
- Others- WIM2480
- Others- LED Flat Panels
- Others- Retrofit Troffers
- Warranty Docs
-
Release Notes
-
Other Articles
How are values calculated for the occupancy reports?
The total hours of occupancy detected by a sensor in a day shall be computed by taking the cumulative sum of durations for which the sensor detected presence for that day. One minute shall be considered as occupied if the sensor detects motion at least once in that minute.
The occupancy duration of a floor/zone/group shall be computed as the unique duration to which the sensors have contributed such that the maximum occupancy duration computed for a floor/zone/group in an hour shall be 1 hour irrespective of the number of sensors. For example, consider two sensors S1 and S2 in a group/zone/floor:
- If the 2 sensors detect motion at the same time, say 10:00 to 10:30, the occupancy duration for the group/zone/floor the sensors belong to shall be 30 min.
- If the 2 sensors detect motion at different times, say S1 detects motion from 10:00 to 10:30 (30 min) and S2 detects motion from 10:45 to 11:00 (15 min), the occupancy duration for the group/zone/floor the sensors belong to shall be 45 min.
- If the 2 sensors detect motion for overlapping time durations, say S1 detects motion from 10:00 to 10:30 and S2 detects motion from 10:15 to 10:45, the occupancy duration for the group/zone/floor the sensors belong to shall be 45 min.
You can also visit the following sections for more information:
To know about the analytics that can be performed in the Occupancy - Analytics report, click here
To know the purpose of Energy Consumption Reports, click here